2-1
Chapter 2
Scope/Meter Mode
Introduction
The Scope/Meter mode offers you
• a dual-input 40 MHz digital oscilloscope
• two 5,000 counts true-RMS digital multimeters
This Chapter provides a step-by-step introduction to the
Scope and Meter measurements. The introduction does
not cover all of the capabilities of the test tool but gives
basic examples to show how to use the menus perform
basic operations.
Selecting the Scope/Meter Mode
To select the Scope/Meter mode do the following:
c
Open the application mode menu.
d
Highlight SCOPE/METER
e
Enter the SCOPE/METER mode.
To Next Page
Loading...
