Maintaining the Test Tool
Calibration Information
8
8-7
Calibration Information
You can ask for the model identity (version and calibration
data) at any time. To display the identity, do the following:
c
Open the USER OPTIONS menu.
d
Open the
VERSION&CALIBRATION
submenu.
The screen gives you information about the model number
with software version, the calibration number with latest
calibration date, and the latest battery refresh date.
e
Return to normal mode.
Recalibration must be carried out by qualified personnel
only. Contact your local Fluke representative for
recalibration.
Note:
The test tool specifications are based on a one
year calibration cycle.
Parts and Accessories
Service Manual
A service manual can downloaded from Fluke’s website
www.fluke.com
Standard Accessories
The next tables list the user-replaceable parts for the
various test tool models. To order replacement parts,
contact your nearest service center.
To Next Page
Loading...
