Fluke 125 - Page 82

Fluke 125
Users Manual
8-6
c Open the application mode menu.
d Highlight SCOPE/METER
e Enter the SCOPE/METER mode.
f
(A)
(B)
Open the Input A or the Input B
MEASUREMENTS menu. The
F1….F4 button bar pops up.
g Open the INPUT… menu
h Highlight AC ADJUST…
i Open the PROBE AC ADJUST
submenu.
j Highlight ADJUST 10:1 PROBE.
k A square wave appears on the
screen.
Adjust the trimmer screw in the
probe housing to give an optimum
square wave.
l Return to normal mode.