Fluke 5320A User Manual

Front-Panel Operation
Calibrator Setup Menu 3
3-13
Setting a General Setup Function
The general setup selections are used to set the time, date, beeper on/off, beeper volume,
display brightness, time on display, and calibration password. You can also view the
Calibrator serial number, software versions, and installed options through the General
Setup menu selection.
To access the General Setup functions:
1. Press P or Q or rotate the rotary knob to highlight General in the setup menu
screen
2. To select the highlighted setup selection, either press the Select softkey or press in
on the rotary knob.
Setting the Date
To set the date:
1. After entering the setup menu, press P or Q or rotate the rotary knob to highlight
“Date” in the list of setup selections.
2. Press the Select softkey or press in on the rotary knob.
3. Use T or U to position the cursor on the least significant digit of the year, month or
day. The cursor only rests on the least significant digit.
The displayed format of the date is dd/mm/yyyy.
4. Use the P or Q or rotate the rotary knob to change the date element.
5. Press the Exit softkey to accept the date and exit the date setting function.
Setting the Time
To set the time:
1. After entering the setup menu, press P or Q or rotate the knob to highlight Time in
the list of setup selections.
2. Press the Select softkey or press in on the rotary knob.
3. Use T or U to position the cursor on the least significant digit of the hours, minutes,
or seconds. The cursor only rests on the least significant digit.
4. Use P or Q or rotate the knob to change the time element.
5. Press the Exit softkey to accept the date and exit the date setting function.
Enabling/Disabling the Beeper
To enable or disable the Calibrator’s beeper:
1. After entering the setup menu, press P or Q or rota
te the knob
to highlight
“Beeper” in the list of setup selections.
2. Press the Select softkey or press in on the rotary knob.
3. Move the cursor with the rotary knob or cursor keys to highlight either “Beeper On”
or “Beeper Off”
4. Press the Select softkey or press in on the rotary knob.

Fluke 5320A Specifications

General

Brand	Fluke
Model	5320A
Category	Test Equipment
Language	English