5320A
Users Manual
5-8
Description of Abbreviations
Table 5-3. Abbreviation Descriptions
Abbreviation Description
<DNPD>
Decimal Numeric Program Data. This format is used to express decimal number
with or without the exponent.
<CPD>
Character Program Data. Usually it represents a group of alternative character
parameters. E.g. {ON | OFF | 0 | 1}.
?
A flag indicating a request for the value of the parameter specified by the
command. No parameter other than the question mark can be used.
(?)
A flag indicating a request for the parameter specified by the command. This
command permits a value to be set as well as used a request.
<cr> Carriage return. ASCII code 13. This code executes the program line.
<lf> Line feed. ASCII code 10. This code executes the program line.
SCPI Command Summary
Tables 5-4 through 5-7 summarize the SCPI commands implemented in the
Calibrator.
Table 5-4. OUTPut Command Summary
Command Description
OUTPut[:STATe]? Returns the state of the output terminals.
OUTPut[:STATe]{ON|OFF} Activates or deactivates output terminals .
To Next Page
Loading...
Need help?
General
