Introduction and Specifications
Safety Information 1
1-5
setting up and powering up the Calibrator. Please read this information before operating
the Calibrator.
5320A Users Manual
The Users Manual is available in PDF format on the CDROM provided with your
Calibrator. The manual contains information on operating the Calibrator using the front
panel. The Calibrating Instruments section explains the Calibrator’s functions and the
steps necessary to use them. In addition to operational instructions, this manual also
contains information on general maintenance, along with a verification procedure to
ensure the Calibrator is operating within specifications.
Safety Information
This section addresses safety considerations and describes symbols that may appear in
this manual or on the Calibrator.
A X
W Warning statement identifies conditions or practices that could result in injury or
death.
A
W Caution statement identifies conditions or practices that could result in damage to
the Instrument or equipment to which it is connected.
XWWarning
To avoid electric shock, personal injury, or death, carefully read
the information under “General Safety Summary” before
attempting to install, use, or service the Instrument.
General Safety Summary
The instrument has been designed for according to EN 61010-1 (2
nd
Edition). The design reflects
the requirements of A2 amendment of the standard.
Safety is ensured by the design and use of specific component types. The manufacturer is not
liable for the damage caused by modification to the Calibrator or use of non-original replacement
parts.
To Next Page
Loading...
Need help?
General
