Fluke 5500A - Page 409

Index (continued)
INDEX-7
Softkeys
Using the, 4-4
SP_SET, 6-35
SP_SET? remote command, 6-35
Special Functions Menu, 4-6
Specifications
AC voltage, dc offset, 1-29
Oscilloscope Calibration Option, 8-5, 8-60
Power uncertainty, 1-25
SPLSTR remote command, 6-36
SPLSTR? remote command, 6-36
Squarewave, 4-41
Squarewave and Duty Cycle, 4-42
SRC_PREF remote command, 6-36
SRC_PREF? remote command, 6-37
SRE
Programming the, 5-38
Register, 5-37
SRE remote command, 6-37
SRE? remote command, 6-37
SRQ, Service Request Line, 5-37
SRQSTR remote command, 6-37
SRQSTR? remote command, 6-38
Standard Equipment Table, 2-3
Status
Checking 5500A, 5-35
Register Overview - Figure, 5-36
Register Summary - Table, 5-35
Serial Poll Status Byte, 5-35
Status Commands, 6-7
STB
Explained, 5-35
Programming the, 5-38
STB remote command, 6-38
STBY key, 3-5
STBY remote command, 6-38
Summary of Commands and Queries, 6-8
Oscilloscope Calibration Option, 8-34, 8-83
Syntax
Information, General, 5-31
Parameter Rules, 5-31
Response Messages, 5-34
—T—
Tab Characters, 5-32
Taking a Thermocouple Measurement, 5-46
TC_MEAS remote command, 6-38
TC_OFFSET remote command, 6-38
TC_OFFSET? remote command, 6-39
TC_OTCD remote command, 6-39
TC_OTCD? remote command, 6-39
TC_REF remote command, 6-39
TC_REF? remote command, 6-40
TC_TYPE remote command, 6-40
TC_TYPE? remote command, 6-41
TC_TYPE_D remote command, 6-41
TC_TYPE_D? remote command, 6-42
TEMP_STD remote command, 6-42
Temperature Simulation, 4-35
Temperature Simulation, RTD, 4-37
Terminators, 5-33
Testing a Model 41 Power Harmonics Analyzer, 4-58
Testing Harmonics Amps Performance, 4-61
Testing Harmonics Volts Performance, 4-60
Testing RS-232 Host Port Operation using a Terminal,
5-12
Testing RS-232 Host Port Operation using Visual
Basic, 5-14
Testing RS-232 UUT Port Operation using Visual
Basic, 5-18
Testing RS-232 UUT Port Operation via a Terminal,
5-17
Testing the IEEE-488 Port, 5-8
Testing the Meter, 4-53
Testing the RS-232 Host Port, 5-12
Testing the RS-232 UUT Port via IEEE-488 Port, 5-
19
Testing the RS-232 UUT Port via RS-232 Host Port,
5-17
Testing the Thermometer, 4-62
Testing Watts, VA, VAR Performance, 4-58
Thermocouple
Measuring Temperatures, 4-39
Thermocouple (TC) Measurement Commands,
6-7
Thermocouple Measurement Accuracy, 7-18
Thermocouple Measuring Accuracy, 7-18
Thermocouple Performance, 4-63
Thermocouple Sourcing Accuracy, 7-18
Time Marker
Oscilloscope Calibration, 8-27, 8-81
Time Marker Calibration, 8-26, 8-80
Time Marker Function, 8-26, 8-80
Specifications, 8-9
Trianglewave, 4-41
TRIG OUT key, 3-7
Trigger Specifications, 8-11, 8-64
Trigger Tests for Oscilloscope, 8-28, 8-82
Truncated Sinewave, 4-42
Truncated Waveform
Truncated, 4-42
TSENS_TYPE remote command, 6-43
TSENS_TYPE? remote command, 6-43
Turning on the Calibrator, 4-3
Types of Commands, 5-25
—U—
Unpacking, 2-3