PostBase Fusion
116
14.10 Auto Off
PostBase Fusion can be turned off automatically if you do not use PostBase Fusion
for a while. The “AutoOff Time” is the length of time between the last operation and
when the system turns off automatically.
• Open the M
ENU.
• Choose S
TANDBY SETTINGS.
• Choose A
UTO OFF.
PostBase Fusion opens the Auto Off Time
setting menu.
• Type the desired time (in minutes).
• Confirm with OK.
The value “0” disables the Auto Off function.
14.11 Automatic date advance
If mail is metered after the last pick up or past the deposit time, you can set the
“Auto Date Advance” to automatically advance the date at a predefined time.
PostBase Fusion will then remind you every day at the defined time to set the
metering date.
• Open the M
ENU.
• Choose A
UTO DATE ADVANCE.
PostBase Fusion displays the current setting
of the “Automatic date advance” feature.
L
AST RATE PostBase Fusion keeps the current (last)
product setting.
R
ATE AFTER STANDBY – possible settings and their meaning:
To Next Page
Loading...
