PostBase Fusion
24
Step 3: Assembling the hand-feed sealer (optional)
The sealer is positioned to the left of the post-
age meter instead of the hand feed tray. The
catches on the right side of the sealer and
slots (on the left side of the bottom side of the
postage meter) mechanically couple the two
components and fasten them in position rela-
tive to each other.
Assembling the sealer
• Place the sealer to the left of the postage
meter.
• Gently lift the postage meter on the left side
and push the sealer towards the postage
meter so that the front sides are flush.
• Carefully lower the postage meter so that
the catches of the sealer engage in the
slots on the bottom side of the postage
meter.
Filling with sealing fluid
• Swivel the cover of the filling opening to the
side.
To Next Page
Loading...
