Setting the meter imprint
53
5 Setting the meter imprint
This chapter describes the required settings for metering and additional possible
advertising imprints:
– Postage / USPS rates (see chapter 5.1)
– Date (see chapter 5.2)
– Advert imprints (see chapter 5.3).
Refer to chapter 5.4 on how to use the “Imprint offset” function to laterally displace
the meter imprint position.
You can test the current meter settings using a zero imprint. Read more about it in
chapter 5.5.
Refer to chapter 6.5 on how use correction imprints for already metered mail pieces.
: The examples in this manual show actual postal products and rates. In the
event of a USPS rate change, the examples may not correspond to the current rates
or products.
Advert imprint Date Postage
Postal Class
Serial number of the
postage meter
2D Data matrix
Advert imprint
To Next Page
Loading...
