PostBase Fusion
142
15.9 PostBase Fusion Feeder (optional)
15.9.1 Filling with sealing fluid
We recommend using the SEALIT sealing fluid. This special sealing fluid is available
from FP or an authorized FP dealer.
Warning! Electrical hazards due to short circuits.
Be extremely careful when handling fluids. If you fill the sealant tank, make
sure not to dampen any parts connected to electronics. If this should happen,
immediately pull the power plugs. Have the PostBase Fusion mailing system
checked by the Customer Support before using it again.
• Switch the mailing system off.
The sealant tank is located under the trans-
parent flap. To open the flap:
• Press the key.
3 seconds
To Next Page
Loading...
