FP PostBase Fusion - Correcting Incorrect Meter Imprints; Postage Correction

Metering
83
6.5 Correcting incorrect meter imprints
6.5.1 Postage correction
You can correct improperly metered postage values on an already metered letter.
If you have metered a postage which is too low, print a correction with the missing
amount on the non-address side of the mail piece.
Setting the CORRECTION imprint
In the Home screen:
• Tap the postage button.
PostBase Fusion opens the rate selection
menu (Product Calculation).
• Tap the S
PECIALS option
(is shown at the end of the list).
• Choose C
ORRECTION.
• Type the amount to be imprinted on the
mail piece in addition to the postage
already metered and confirm OK.
• C
ONFIRM the displayed product setting and
return to the Home screen.
Print postage correction
The Home screen shows the current settings
for the correction imprint. You can change
the settings (e.g. date, imprint offset) in the
same way as with a regular meter imprint.
• Position the mail piece the
non-address side face up
.
PostBase Fusion prints the correction
imprint.
When printing the postage correction,
advertising imprints are not available.