PostBase Fusion
8
1 For your safety
The PostBase Fusion complies with the relevant safety regulations for information
technology equipment in office environments.
Before setting up and installing and using the PostBase Fusion mailing system,
please read this safety information carefully.
For your own safety, please observe the following instructions:
Proper use
• PostBase Fusion is a digital mailing system with ink-jet print technology for
metering mail.
• The PostBase Fusion mailing system is intended only for use in enclosed offices
or office-like environments. Observe the operating conditions specified in the
“Technical Data” section.
• The PostBase Fusion mailing system is intended exclusively for processing mail
pieces in accordance with the specifications described in the “Technical Data” section.
Prevention of electrical hazards
• Operate the PostBase Fusion mailing system only with a grounded single-phase
power outlet. Make sure that the power connection conforms to the power require-
ments indicated on the type plates.
• Make sure the outlets for connecting the PostBase Fusion mailing system are close
by and easily accessible at all times.
• Unplug the PostBase Fusion mailing system power plugs from the outlets in case
of an emergency.
• Take care to ensure that no foreign objects penetrate the PostBase Fusion mailing
system interior.
• Be extremely careful when handling fluids.
• When refilling the sealing fluid, make sure that no moving parts or electronics
become wet.
• Unplug all power plugs of the PostBase Fusion mailing system prior to cleaning
the mailing system.
Prevention of mechanical hazards
• Keep long hair, fingers, loose clothing pieces, neck ties, scarves, jewelry and the
like away from moving machine parts.
• Do not remove any parts of the housing.
• Do not remove any equipment related to safety or protection. Do not make them
inoperative or unable to function.
To Next Page
Loading...
