PostBase Fusion
52
4.8 Setting up the catch tray
The catch tray can be adapted to different
envelope sizes (up to 10" × 14") by displacing
the catch bracket.
The stop features several catches for the
most common sizes.
4.9 Using the High Capacity Drop Stacker (optional)
The Drop Stacker, which is available from FP as an optional additional component for
the PostBase Fusion mailing system, is placed instead of the catch tray to the right
of the postage meter. Retrofitting the PostBase Fusion with the Drop Stacker is also
very easy. Especially for larger quantities of outgoing mail, the Drop Stacker with a
capacity of up to 250 letters (#10 envelope containing one sheet 8.5" x 11" 20 pound bond paper) is
a practical alternative to the letter catch tray.
Installation
• Install the Drop Stacker according to the
assembly instructions. (The detailed
assembly instructions for the Drop Stacker
are included in the package).
Adapting to the envelope format
• You can move the right side wall in direc-
tion of the arrow using the handle. Catch
points, which are spaced apart by approx.
0.6" / 15 mm allow adjustment to match the
different envelope formats.
To remove the letter stack …
Thanks to the specially shaped shaft bottom,
the carefully stacked mail pieces can be easily
accessed from the bottom and removed
stackwise, even when the machine is running.
To Next Page
Loading...
