Setting the meter imprint
65
5.5 Test print – testing the meter imprint settings
Using a test print, you can assess the settings for the meter imprint.
Test print (example) The indication VOID overprinting the data
matrix as well as the postage value $000.000
identify the test print as an invalid meter
imprint.
You must never mail test prints.
Test prints are not logged in the registers.
Setting a test print
• Set the desired parameters for the meter
imprint (advert, date, imprint offset etc.).
In the Home screen:
• Tap the postage button.
• Set the desired product.
Once all necessary mailing data are set, you
can perform a test print. The T
EST PRINT
PRODUCT
option is shown at the end of the
additional services list.
• Choose T
EST PRINT PRODUCT.
PostBase Fusion prompts you for a test print.
Print test print on a label
• Tap L
ABEL to print the test print on a label.
PostBase Fusion generates the test print and
prints it on a label.
To Next Page
Loading...
