Installation and commissioning
29
R-PIN
• Enter the R-PIN (Repository-PIN).
• Confirm with C
ONTINUE and resume the
installation.
Synchronization …
PostBase Fusion now loads software and
data and then restarts.
• Follow the information and instructions on
the display.
Inserting the ink cartridges
• Tap C
ONTINUE to insert the ink cartridges.
Note
: Do not touch the cover flap of the print
system or otherwise obstruct the automatic
opening.
PostBase Fusion moves the print system to
the change position and then opens the
cover flap.
The screen sequence in the display shows
the sequence of the cartridges change.
The insertion of the cartridges is described in
detail below.
8IFOOJTIFE
1MFBTDMPTFDPWFS
$IBOHF$BSUSJEHF
To Next Page
Loading...
