Maintenance and care
125
15.10 Clean / replace the sponge (PostBase One with sealer)
The sponge for moistening the envelope flaps should be cleaned regularly (e.g. al-
ways after weekend). Check the condition of the sponge and replace it if exhausted.
We recommend always keeping a new sponge in reserve.
• Switch off PostBase One and all compo-
nents connected to.
• Press the release key.
The moistening unit swings to the front by
itself.
• Hold the moistener as illustrated.
• Slightly press down the lug of the fixation
plate and remove the fixation plate.
• Remove sponge.
• Check if the sponge is in proper state.
• To clean the sponge: rinse with plenty of
water to remove glue residues.
Or
• Replace the exhausted sponge.
• Moisten the new sponge prior to insertion.
Thus, you make sure that the flaps will be
correctly moistened from the start.
To Next Page
Loading...
