PostBase One Franking System
96
14.13 Uploading product data
Your PostBase One Mailmark™ franking system needs to upload product usage data
daily. If you keep your PostBase One switched on and connected to the internet, this
will happen automatically each day at midnight.
PostBase One will remind you when it is time to upload the product usage data. If you
fail to do so, the franking machine will lock down after a certain amount of time until
you performed a data upload.
Upload data manually
• Open the MENU.
•Select D
ATA UPLOAD.
PostBase One establishes a connection with
the data centre and will then upload its prod-
uct usage data to Royal Mail. Please stand
by.
A pop-up message is displayed when
uploading data is completed.
Uploading product data is also done by post-
age downloading a value of £ 0.
To Next Page
Loading...
