Maintenance and care
127
15.11 Calibrating the touch screen
You have to calibrate the touch screen when operating the screen with your finger or
with the stylus does not work correctly.
• Turn on the PostBase One.
As soon as the screen displays the
PostBase One logo:
• Touch and hold your finger in the mid-
dle of the display until the calibration pro-
cedure starts.
A red circle (the first calibration circle)
appears in the upper left corner.
• Touch the red circle with the stylus.
• Follow the further instructions on the
display: Touch each of the displayed cali-
bration circles with the stylus.
PostBase One will continue its start routine.
The touch screen is now calibrated.
To Next Page
Loading...
