The basics of operation
17
3.5.2 Separation function
In most cases, you can use the default setting. In case of letters with ‘critical’
demands for separation, you can adjust the feeder easily.
In the following cases, an adjustment is recommended:
– very thick letters
– very heavy letters
– thin, unstable letters
– letters with sensitive surfaces.
These ‘critical’ letters constitute only a small fraction of the whole amount of letters
processed.
Not processable:
– very soft and unstable letters
– rigid letters (books, catalogues etc.).
3.5.2.1 Recommended settings for separation (overview)
Setting
Left lever
(separation)
Right lever
(pressure)
1 Soft and unstable letters
2 Thick letters
7 mm and more
3 Default setting
(recommended)
4 Very heavy letters with
strong stiffness
To Next Page
Loading...
