Maintenance and care
119
15.7.2 Cleaning ink cartridges / print heads by hand
Caution! Improper cleaning may damage the ink cartridges / print heads or
render them unusable. Heed the following tips to avoid damage to the print
system:
• If you encounter imprint quality issues, always perform one of the system
cleaning functions available from the MENU first. Please refer to
chapter 15.7.1 on page 118.
• You should only clean the ink cartridges / print heads manually in
exceptional cases when automatic cleaning fails to restore the normal print
quality.
• Only use a soft, fibreless cloth that is moistened with de-ionised water for
cleaning. Small fibres might clog the nozzles. A cloth that is dry or not soft
enough may cause scratches. Such scratches make the cartridge / print
head become unusable, because they prevent the ink jet from being cor-
rectly positioned during printing.
• Do not use chemical cleaning agents.
Moving the ink cartridges / print heads
into the changing position
• Open the M
ENU.
• Choose P
RINT SYSTEM.
• Choose C
HANGE CARTRIDGES.
PostBase One moves the ink cartridges /
print heads to the exchange position and
opens the flap.
Removing the cartridges / print heads
• Remove one
ink cartridge / print head.
For detailed instructions on how to remove
and insert ink cartridges
, see chapter 15.3.
For detailed instructions on how to remove
and insert print heads
(PostBase One Bulk Ink),
see chapter 15.4.
To Next Page
Loading...
