FP PostBase One - Product after Standby; Auto off

PostBase One Franking System
88
14.6 Product after Standby
This feature lets you define which product will be set for franking after reactivating
PostBase One from standby:
– the product stored as shortcut 1
– the product that was last used.
• Open the MENU.
• Choose PROD. AFTER STANDBY.
PostBase One opens the adjustment menu
for this function. The current setting is shown
on a dark background.
• Select the desired setting.
•S
AVE the setting shown.
14.7 Auto Off
PostBase One switches off automatically if it is not used for some time. The Auto Off
time is the time between your last operation and the time PostBase One automati-
cally switches off.
• Open the M
ENU.
• Choose AUTO OFF.
PostBase One opens the adjustment menu.
• Type the desired time.
•S
AVE the specified Auto Off time.
The value “0” disables the Auto Off function.
PROUCT AFTER STANDBY – possible settings and their meaning:
S
HORTCUT 1 After reactivating PostBase One from standby,
the product stored as shortcut 1 is set.
LAST PRODUCT PostBase One keeps the current (last) prod-
uct setting.