PostBase One Franking System
16
3.5 Adjusting the feeder (optional)
3.5.1 Adjusting the letter path
You always have to adjust the feeder according to the thickness of the letters being
processed. With the slider (thickness) you adjust the letter path of the separation to
the thickness of the letters. Thereby, you avoid too many letters being fed at once.
There are three settings possible: narrow, medium and wide letter path.
• Release the slider “thickness” by pressing
down slightly and move it to appropriate
position.
Letter path – possible settings and their meaning:
Narrow letter path
to process thin letters up to a thickness of
2mm
Medium letter path
to process letters of medium thickness
3mm to 5mm
Wide letter path
to process letters of a thickness more than
5mm
To Next Page
Loading...
