PostBase One Franking System
80
12.5 Seal Only (optional)
With the special function ‘Seal Only’, you can seal and count letters without printing
(up to 7 mm / 0.3"). This special function is only available on PostBase One systems
with feeder. Please heed the mail piece specifications on page 182.
• Open the M
ENU.
• Choose S
PECIAL FUNCTIONS.
• Choose S
EAL ONLY.
• On the feeder, switch on the seal function:
Set the switch to the position SEAL
(see also chapter 3.6).
• Position letter stack on the feeder / start let-
ter transport.
When stack processing with the automatic
feeder for the ‘Seal Only’ special function,
proceed exactly as when franking mail.
For detailed information, please read
chapter 5.3.2.
The ‘Seal Only’ special function has its own
counter. PostBase One shows the number of
transported mail pieces on the upper right
side of the display. When quitting the ‘Seal
Only’ function, the counter is reset to ‘0’.
To Next Page
Loading...
