PostBase One Franking System
98
14.15 Adjusting moistening (PostBase One with sealer)
PostBase One monitors the operational conditions of the sealer. Upon system start,
as well as occasionally during operation, sealing liquid from the tank is pumped to the
moistening sponge. Thus, PostBase One makes sure the sponge is always properly
wetted. You only need to adjust the moistening if the envelope flaps are moistened
too little or too much.
• Open the M
ENU.
• Choose M
OISTENER.
•Use MORE or LESS to adjust the moistening.
•SAVE the displayed setting.
14.16 Remote Services
With the ‘Remote Services’ function, PostBase One connects to the FP server and
checks for updates (e.g. a new rate table, new machine software). Diagnostic data is
also exchanged with the FP server.
• Open the M
ENU.
• Choose R
EMOTE SERVICES.
PostBase One starts the update procedure.
It takes some time to establish the connec-
tion and to exchange data. Please stand by.
Functions and settings of the MOISTENER menu and their meaning:
MORE Increase moistening of envelope flaps.
STANDARD Restore default moistening level.
L
ESS Decrease moistening of envelope flaps.
START PUMP If moistening has been enabled on the
sealer, sealing liquid from the tank will imme-
diately be pumped to the moistener.
To Next Page
Loading...
