PostBase One Franking System
92
14.9 View contact information
Important contact information (Phone / Internet) is stored in your franking machine at
the factory. You can view the contact information.
• Open the M
ENU.
• Choose C
ONTACT INFORMATION.
PostBase One displays the stored phone
numbers and URLs.
14.10 Access control / PIN
PostBase One can be protected against unauthorised use via a PIN.
With the PC software, you can set up a user-specific access control for the
PostBase One. Please refer to the manual of the PC software. In the PostBase One
menu, the PIN function is then only accessible with the administrator PIN.
Enable access control
• Open the MENU.
• Choose M
ANAGE PIN.
• Confirm the prompt with C
ONTINUE.
PostBase One opens the access control
adjustment menu.
• Enter a PIN and CONTINUE.
• Enter the PIN a second time to confirm.
•SAVE the PIN.
The PIN is set. Each time you start up
PostBase One, you have to enter the PIN to
get access.
To Next Page
Loading...
