Maintenance and care
101
15.3 Changing the ink cartridges
PostBase One monitors the filling level in the ink cartridges and issues a message
when they must be replaced.
We recommend that you always have a new FP cartridge kit in stock.
We advice to clean the contacts in the cartridge bracket at each cartridge replace-
ment. Use the special ‘clean & renew’ cleaning kit for ink-jet print systems, available
at Francotyp-Postalia.
Warning! Ingestion of the ink can be hazardous. Avoid contact with the eyes.
Keep the ink cartridges away from children. Further instructions for use are
enclosed with the ink cartridges.
Caution! To ensure proper imprints, please heed the following instructions
when handling ink cartridges:
• Use up within 12 months after opening the vacuum packaging.
• Always keep unprotected nozzles facing down.
• Handle with care when without nozzle protection.
Caution! Heed the following tips to avoid damage to the print system:
• Do not yank the cartridge flap open. Run the C
HANGE CARTRIDGES function
from the P
RINT SYSTEM menu. The flap then opens by itself.
• We recommend to use only approved FP equipment and FP original parts.
The manufacturer FP has established reliability, safety and applicability.
The manufacturer cannot assess the reliability, safety and applicability for
products not approved by FP, and therefore not vouch for such products.
• Always replace the ink cartridges in pairs. Only insert new ink cartridges.
Caution! There could be ink residues on the used cartridges.
• Take care not to soil your skin, your clothes, or objects near by.
• Use a mat to place the ink cartridges.
Changing the ink cartridges
PostBase One will prompt you to replace the
cartridges when they are depleted.
• Confirm the message.
To Next Page
Loading...
