Appendix – Moving the PostBase One to another location
163
Installing the PostBase One franking system on a new location
Caution! Please observe the following notes on systems with a dynamic
scale:
• Have the franking system installed by a service technician.
• As for the choice of the place of installation, make sure that the feeder and
the dynamic scale rest on the same base (table / pedestal base).
• By no means must the base vibrate or be mechanically unstable.
Location • Make sure that the new location meets the
following requirements:
– room temperature: +15 °C to +35 °C
(59 °F to 95 °F)
– not exposed to direct sunlight
– relative humidity:
20 % to 70 %, non-condensing
– power socket in the immediate vicinity
– network connection.
Feeder
Dynamic scale
Franking machine
Power Sealer
Letter catch tray
Sealer
Static scale
To Next Page
Loading...
