PostBase One Franking System
166
Mounting the envelope slide
On the power sealer If you use a power sealer:
• Attach the appropriate envelope slide to
the power sealer. Both hooks of the enve-
lope slide must snap into the housing of the
power sealer.
On the franking machine If you do not use a power sealer:
• Position the envelope slide (standard ver-
sion for systems without power sealer) on
the connector as shown in the illustration
and push it back firmly. You will feel the
envelope slide lock into place.
Insert the catch brackets
• Push the catch bracket into the slot of the
envelope slide from the right.
• Push in the back bracket.
To Next Page
Loading...
