Franking
55
PostBase One opens the ‘Batch Processing’
pop-up.
• Select F
EEDER.
(In most cases, ‘Feeder’ is already
selected when opening the pop-up.)
• In the pop-up, press the button below the
F
EEDER button.
• Enter the amount of letters you want to
frank.
Or:
Enable continuous operation with the
button.
•SAVE the setting.
• Position the prepared letter stack.
For details on how to set up the feeder and
position letter stacks, please read
pages 51 to 54.
PostBase One feeds the letters one by one,
prints, and places the franked letters in the
catch tray. The counter displays the number
of letters still to be franked. You can interrupt
batch processing with the S
TOP button.
To Next Page
Loading...
