FP PostBase One - Page 90

PostBase One Franking System
90
Connectivity Settings and their meaning:
Connection Type
ETHERNET / LAN
(default setting, not changeable)
LAN connection. PostBase One connects to the
Francotyp-Postalia Infrastructure (FPI) via the
internet.
DHCP Dynamic Host Configuration Protocol. Network-
ing protocol that allows automatic connection to
a network.
DHCP = E
NABLED
(default setting)
Select this setting if your network supports
DHCP.
DHCP = DISABLED Select this setting if your network does not sup-
port DHCP.
During manual configuration, you will need to
enter the following parameters:
– Static IP address for your PostBase One
– Subnet mask
– Default gateway
– IP address of the DNS server.
Please contact you network administrator for
details.
Note: When entering IP addresses, you have to
enter the dots, too.
Proxy-Server Intermediary server that facilitates access to the
internet.
PROXY = DISABLED
(default setting)
Select this setting if your network does not use a
proxy server.
P
ROXY = ENABLED Select this setting if your network uses a proxy
server.
You will need to enter the following parameters:
– IP address of the proxy or its alias
– Port number.
Please contact you network administrator for
details.