FP PostBase - Page 94

PostBase Mailing System
94
Test print (example) The PostBase prints a test print with each a
horizontal and vertical line pattern (similar to
the example on the left).
• Compare the horizontal line on the test
print with the line patterns in the display.
• Press the button that shows the line pattern
best matching that of the test print. In the
example, this is button number “2”.
• Compare the vertical line
on the test print
with the line patterns in the display.
• Press the button that shows the line pattern
best matching that of the test print. In the
example, this is button number “7”.
The PostBase analyses your entries.
New test print required When an offset of the horizontal and/or
vertical line was found the PostBase adjusts
the ink cartridges accordingly and prompts
you to perform another test print.
• Place an empty envelope for another test
print.
• Repeat the adjustment procedure as
described above.
You may have to repeat the adjustment
procedure several times.