3.4 Programming Mode
3-19
OPERATION USING THE KEYPAD
When changing function code data, pressing the key once blinks the least significant digit. After that,
each time the key is pressed, the cursor moves to the next higher digit where data can be changed.
This cursor movement allows you to easily move the cursor to the desired digit and change the data in
higher digits. This cursor movement allows you to easily move the cursor to the desired digit and change
the data in higher digits.
Frequently used function codes can be registered in “Favorites”. Refer to section "3.4.8 Setting “Favorites”
function code data” for details.
Operation example: Operating procedure when changing C05 (multistep frequency 1) from 0.00 to 25.00
The following screens correspond to previous operations (1) to (6).
Continued
“SAVE” appears.
Press the key.
(changes are saved)
Change to
25.00
with
the and keys.
Select
C 05
with
the and
keys.
Select
1.C__
with the
and keys.
Continued
Display the next
function code.
Display the original function code.
Press the key.
(changes are canceled)
To Next Page
Loading...
