Fuji Electric FRENIC MEGA G2 Series - Page 357

5.3 Description of Function Codes 5.3.2 E codes (Extension terminal functions)
5-173
FUNCTION CODES
Chap 5
FUNCTION
CODES
F Codes
E Codes
C Codes
P Codes
H Codes
A Codes
b Codes
r Codes
J Codes
d Codes
U Codes
y Codes
K Codes
Fig. 5.3-18
Fig. 5.3-19
Reference frequency (1)+E30
Reference frequency (1)
Reference frequency (1)-E30
Reference frequency (2)+E30
Reference frequency (2)
Reference frequency (2)-E30
Frequency setting
Frequency setting change
Output frequency
Frequency arrival “FAR”
Frequency arrival 2 “FAR2”
Frequency arrival delay E29
Frequency
arrival delay
E29