Fuji Electric FRENIC MEGA G2 Series - Page 549

5.3 Description of Function Codes 5.3.9 d codes (Applied functions 2)
5-365
FUNCTION CODES
Chap 5
FUNCTION
CODES
F Codes
E Codes
C Codes
P Codes
H Codes
A Codes
b Codes
r Codes
J Codes
d Codes
U Codes
y Codes
K Codes
 Pass point detection
When the set pass point detection positions 1 and 2 are passed, digital output pass point detection signals “PPAS1”
and “PPAS2” can be turned ON. Pass point detection position 1 corresponds to “PPAS1”, and pass point detection
position 2 corresponds to “PPAS2”.
The ON and OFF conditions differ depending on the pass point detection position polarity.
(1) When pass point detection position is 0 or higher (+): ON when current position ≥ pass point detection position,
OFF when current position < pass point detection position
(2) When pass point detection position is less than 0 (-): ON when current position ≤ pass point detection position,
OFF when current position > pass point detection position
Function
code
Name
Data setting range
Factory
default
Change
during
operation
E20 to
E24, E27
Terminal [Y1] to [Y4]
(Function selection)
Terminal [Y5A/C]
(Function selection)
Terminal [30A/B/C]
(Function selection)
153(1153): Pass point detection 1 “PPAS1”
154(1154): Pass point detection 2 “PPAS2”
-
N
d229
Pass point detection position 1 - 4
higher order digits
-9999 to +9999
0
Y
d230
Pass point detection position 1 - 4
lower order digits
0 to 9999
0
Y
d231
Pass point detection position 2 - 4
higher order digits
-9999 to +9999
0
Y
d232
Pass point detection position 2 - 4
lower order digits
0 to 9999
0
Y
帰還現在位置
通過点検出位置1【d229】【d230】
通過点検出位置2【d231】【d232】
正値設定
OFF
ON
原点
0
帰還現在位置
通過点検出位置1【d229】【d230】
通過点検出位置2【d231】【d232】
負値設定
OFF
ON
原点
0
通過点検出1 [PASS-OUT1] 153
通過点検出2 [PASS-OUT2] 154
OFF
ON
OFF
ON
通過点検出1 [PASS-OUT1] (1153)
通過点検出2 [PASS-OUT2] (1154)
通過点検出1 [PASS-OUT1] 153
通過点検出2 [PASS-OUT2] 154
通過点検出1 [PASS-OUT1] 1153
通過点検出2 [PASS-OUT2] 1154
Home position
Pass point detection position 1 [d229] [d230]
Pass point detection position 2 [d231] [d232]
Feedback current position
Positive value setting
Pass point detection 1 [PPAS1] 153
Pass point detection 2 [PPAS2] 154
Pass point detection 1 [PPAS1] (1153)
Pass point detection 2 [PPAS2] (1154)
Pass point detection position 1 [d229] [d230]
Pass point detection position 2 [d231] [d232]
Home position
Negative value setting
Feedback current position
Pass point detection 1 [PPAS1] 153
Pass point detection 2 [PPAS2] 154
Pass point detection 1 [PPAS1] 1153
Pass point detection 2 [PPAS2] 1154