Fuji Electric FRENIC MEGA G2 Series - Page 606

5.3 Description of Function Codes 5.3.13 K codes (Keypad functions)
5-422
K08
Status display
The status message displayed on the multi-function keypad LCD can be hidden or displayed.
・Data setting range: 0, 1
K08 data
Function
0
Hide
1
Display (factory default)
K15
Screen selection
The multi-function keypad LCD sub-monitor display type can be selected.
・Data setting range: 0, 1
K15 data
Function
0
Numerical display (factory default)
1
Bar graph display
Display example
Undervoltage
Performing forced stoppage
Restarting after momentary power failure
Awaiting retry
Performing forced operation
Performing commercial operation, etc.
Status message
Displays operating statuses that the operator needs to be notified of.
Sub-monitor 1
Sub-monitor 2
Bar graph 1
Bar graph 2
Bar graph 3
Main monitor
<Sub-monitor: Numerical display>
<Sub-monitor: Bar graph display>