6.4 If a Warning Code is Displayed
6-31
[ 11 ] UTl Low torque detection
This is displayed when the output torque drops to the low torque
detection level (E80) or below, and persists for the timer (E81) time or
longer.
[ 12 ] Lob Low battery warnig (for Multi-function Keypad (TP-A2SW))
(1) The TP-A2SW multi-function
keypad (option) remaining
battery capacity is insufficient.
∙ Check whether the trip history date and time information has been lost.
∙ Refer to the TP-A2SW multi-function keypad instruction manual, and
replace the battery (sold separately) and set the date and time
information again.
To Next Page
Loading...
