Fuji Electric FRENIC MEGA G2 Series - 11.17 IP40 Compatibility Attachment (P40 ST-F□1)

11.17 IP40 Compatibility Attachment (P40ST-F□1)
11-80
11.17 IP40 Compatibility Attachment (P40ST-F□1)
(1) Overview
The inverter protective construction can be changed from IP20 (enclosed type) to IP40 (fully-enclosed type) by
installing the IP40 compatibility attachment on FRENIC-MEGA standard specification 1 (basic type).
(2) Configuration
Table 11.17-1
(3) Specifications
This kit can only be installed on standard specification 1 (basic type).
Applicable inverter
Table 11.17-2
Model
Inverter capacity
FRENIC-MEGA (G2)
FRN0003G2S-2G/FRN0002G2□-4G to
FRN0115G2S-2G/FRN0060G2□-4G
Type and weight
Table 11.17-3
Item
Specification
Type
P40ST-FA1
P40ST-FB1
P40ST-FC1
P40ST-FD1
Applicable inverter type
(FRN□□□G2S-2/4)
0.4
0.75
1.5
2.2
3.7
5.5
7.5
11
15
18.5
22
Weight [kg]
0.1
0.2
0.3
0.4
P40ST-FA1
P40ST-FB1
P40ST-FC1
P40ST-FD1
Type
Configuration
Closing plate (side face, small) x 3
Closing plate (side face, large) x 1
Wiring cover x 1
Closing plate (side face, small) x 3
Closing plate (side face, large) x 1
Wiring cover x 1
Closing plate (side face, small)
x 3
Closing plate (side face, small)
x 3
Closing plate (side face, large)
x 1
Closing plate (side face, large)
x 1
Closing plate (right corner) x 1
Wiring cover x 1
Wiring cover x 1
(left corner) x 1
Cross recessed head screw with
captive washer x 2 (M5x10)
Cross recessed head screw with
captive washer x 2 (M5x10)
Closing plate (right corner) x 1
(left corner) x 1