292 Using the Operator Panel Menus and Keypad
• Paper Size
Purpose:
To specify the output paper size for PDF files.
Values:
• Layout
Purpose:
To specify the output layout.
Values:
Network
Use the Network option to change the printer settings affecting jobs sent to the printer through the
network.
•Ethernet
Purpose:
To specify the communication speed and the duplex settings of Ethernet. To make any changes
effective, turn off the printer and then turn it back on.
Values:
NOTE:
• This menu item appears only when the printer is connected to a wired network.
A4 - 210x297mm*
Letter - 8.5x11"
Auto
* Factory default menu setting
Auto %*
100% (No Zoom)
2 Pages Up
4 Pages Up
* Factory default menu setting
Auto* Detects the Ethernet settings automatically.
10BASE-T Half Uses 10base-T half-duplex.
10BASE-T Full Uses 10base-T full-duplex.
100BASE-TX Half Uses 100base-TX half-duplex.
100BASE-TX Full Uses 100base-TX full-duplex.
* Factory default menu setting
To Next Page
Loading...
