294 Using the Operator Panel Menus and Keypad
• Wireless Setup (DocuPrint M255 z only)
Purpose:
To configure wireless network settings.
Values:
NOTE:
• This menu item appears only when the printer is connected to a wireless network.
Manual
Setup
Enter Network
(SSID)
Enter a name of up to 32 alphanumeric characters to identify the
wireless network. As the factory default menu setting,
"wireless_device" is specified in advance.
Infrastructure Configures a wireless network with access points.
No
Security*
Configures a wireless network without security
encryption.
Mixed Mode
PSK
Configures a wireless network with the WPA-PSK-
TKIP, WPA-PSK-AES and WPA2-PSK-AES
encryptions.
PassPhrase
Entry
Enter a passphrase of 8 to 63
alphanumeric characters.
WPA-PSK-
TKIP
Configures a wireless network with the WPA-PSK-
TKIP encryption.
PassPhrase
Entry
Enter a passphrase of 8 to 63
alphanumeric characters.
WPA2-PSK-
AES
Configures a wireless network with the WPA2-PSK-
AES encryption.
PassPhrase
Entry
Enter a passphrase of 8 to 63
alphanumeric characters.
WEP Configures a wireless network with the WEP
encryption and specify a WEP key of 10 or 26
hexadecimal characters.
Transmit
Key
Select the transmit key from
Auto, WEP Key 1, WEP Key 2,
WEP Key 3, and WEP Key 4.
Ad-hoc Configures a wireless network without access points.
No
Security*
Configures a wireless network without security
encryption.
WEP Configures a wireless network with the WEP
encryption and specify a WEP key of 10 or 26
hexadecimal characters.
Transmit
Key
Select the transmit key from WEP
Key 1, WEP Key 2, WEP Key 3,
and WEP Key 4.
* Factory default menu setting
To Next Page
Loading...
