EasyManua.ls Logo

Fujitsu ETERNUS CS800 S6 - Page 108

Fujitsu ETERNUS CS800 S6
561 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6.3 Running the Getting Started Wizard
Configuring General Network Settings
Under General, enter the following network information as provided by your network
administrator (see "Network Page: General" on page 108):
Figure 81: Network Page: General
When entering IP addresses, never use an address that is in a reserved IP
address range. To see a list of reserved IP address ranges, click the quick tip icon
[?] located near the IP address field.
Hostname The hostname of the ETERNUS CS800.
The Hostname cannot be blank and must contain only
letters
[ A–Z, az ], numbers [ 0–9 ], and hyphens [ - ].
Default Gateway The default gateway IP address.
Specifying a default gateway is optional if all access is
local to a particular subnet. For example, if the
ETERNUS CS800 and all of its clients are on the same
subnet, you do not need to specify a default gateway.
CAUTION!
Specifying a default gateway is required to
enable connectivity with all subnets other than
those that the ETERNUS CS800 is directly
connected to. For example, if the ETERNUS CS800
and its clients are on different subnets, or you are
using an external NTP server, you must specify a
default gateway.
DNS Suffix Search List (Optional) The domain list to search when resolving
domain names.
The list may be either a single domain name or a
comma-separated list of up to 6 domain names. The
first domain name listed is used as the local domain.
Domain names must contain only letters [ A–Z, a–z ],
numbers [ 0–9 ], dots [ . ], and hyphens [ - ].
ETERNUS CS800 108

Table of Contents

Other manuals for Fujitsu ETERNUS CS800 S6

Related product manuals