8.4 OST Wizard
Name Enter the name of the storage server.
CAUTION!
Do not use an underscore ( _ ) in the name of
the storage server.
Description (Optional) Enter a brief description of the storage
server.
Max Connections Enter the maximum number of connections allowed
to the storage server. To disable OST, enter 0
connections. To enable OST, enter 3 to 65536
connections.
Fujitsu Technology Solutions recommends
setting Max Connections to 300.
Enable Concurrent Optimized
Duplication
Select the check box to enable optimized duplication
during OST ingest.
Concurrent Optimized Duplication is disabled by
default. If enabled, as data is written to the storage
server, it is simultaneously replicated to the target
ETERNUS CS800. When optimized duplication or
Automatic Image Replication subsequently occurs,
the operation is more efficient because a portion of
the required data has already been replicated to the
target storage server.
To configure the target ETERNUS CS800, see
"Replication Wizard" on page 152.
When Concurrent Optimized Duplication is
enabled, all data on the storage server is
duplicated, not just the specified images.
2. Select the check box for each optimized duplication target you want to duplicate the
storage server to. When the storage server is duplicated, its data will be sent to all
selected targets.
3. Click Add.
The storage server displays in the Storage Servers Added table.
4. (Optional) To add additional storage servers, repeat Steps 1–2.
To remove a storage server, select it in the Storage Servers Added table and click
Delete.
5. Click Next to continue.
ETERNUS CS800 148
To Next Page
Loading...
