Fujitsu ETERNUS CS800 S6 - Page 249

10.4 OST Configuration
Target IP Mapping List
The Target IP Mapping list displays the following information for all mapped IP addresses:
l Target Data IP - The mapped target data IP address.
l Target Replication IP - The replication IP address to which the data IP address is
mapped.
By default, items in the list are grouped by target replication IP address. To turn off
grouping, click the arrow to the right of a column heading and clear the Show in groups
check box.
To update the list with the latest information, click Refresh.
Mapping a Target IP Address
Add mapping for a target data IP address to route all network traffic sent to the address
to the specified replication IP address instead.
To map a target IP address:
1. Click Add.
The Add Target Data IP Mapping window displays (see "Add Target Data IP Mapping"
on page 249).
Figure 173: Add Target Data IP Mapping
2. Enter information about the mapping:
Target Data IP The target data IP address to map.
Target Replication IP The replication IP address to map the data IP address
to.
3. Click Apply.
Editing a Mapped IP Address
Edit a mapped IP address to route traffic sent to the target data IP address to a different
replication IP address.
To edit a mapped IP address:
ETERNUS CS800 249