Fujitsu ETERNUS CS800 S6 - Page 324

10.9 System
indicated by a Failure dialog box containing the reason for the failure (see "Failed
LDAP/AD Connection" on page 324).
Figure 226: Successful LDAP/AD Connection
Figure 227: Failed LDAP/AD Connection
Test LDAP/AD User
1. Click Test User to test the ability of a LDAP/AD user to successfully log into the
ETERNUS CS800 system. The Test Username and Search Strings dialog box opens (see
"Test Username and Search Strings" on page 324).
Figure 228: Test Username and Search Strings
2. Enter the following information:
Username Enter the user name.
Password Enter the user password.
3. Click Test.
SSL
The SSL page allows you to enable or disable SSL on the ETERNUS CS800. You can also
install a new SSL certificate to replace the Fujitsu Technology Solutions default SSL
certificate.
To access the SSL page, on the Security page, click the SSL tab (see "SSL Page" on page
325).
ETERNUS CS800 324