Fujitsu ETERNUS CS800 S6 - Page 352

11.2 Replication Send
Directory/File or Cartridge Based Replication if you do not want to automatically replicate
files or cartridges.
When you configure a share or partition for Directory/File or Cartridge Based Replication,
you must specify a Sync ID. The Sync ID associates the share or partition on the source
system with the share or partition on the target systems that will received the replicated
data. The Sync ID for the source share or partition must match the Sync ID for the target
share or partition.
If Cartridge Based Replication is enabled for a VTL partition, the following media behaviors
apply:
l When a cartridge is exported from the partition, the cartridge is deleted from the
configured target systems.
l When a cartridge is imported into the partition, the cartridge is replicated to the
configured target systems.
l When a cartridge is deleted on a source system, it is in the Unassigned partition, thus
this action has no effect on Cartridge Based Replication activity.
To configure a source share or partition for Directory/File or Cartridge Based Replication::
1. If you have not already done so, configure the target share or partition on the target
ETERNUS CS800 (see "Configuring a Target Share for Directory/File Based Replication"
on page 365 or "Configuring a Target Partition for Cartridge Based Replication" on
page 376.)
2. On the source ETERNUS CS800, select the source share or partition and click Configure.
The Share or Partition Configure window displays (see "Share or partition Configure
Window" on page 352).
Figure 244: Share or partition Configure Window
3. If it is not already selected, select the Enable Replication check box to enable
replication for the share or partition.
4. Select the Enable Directory/File or Cartridge Based Replication to target to target
check box to enable Directory/File or Cartridge Based Replication for the share or
partition.
Or clear theEnable Directory/File or Cartridge Based Replication to target to target
check box to disable Directory/File or Cartridge Based Replication for the share or
partition.
ETERNUS CS800 352