Fujitsu ETERNUS CS800 S6 - Page 365

11.3 Receive NAS
Access The selected access option for the share (Locked or
Unlocked).
Click the Information button next to a partition to display detailed information
about the share and recent replication activity.
Configuring a Target Share for Directory/File Based Replication
Configuring a NAS share for Directory/File Based Replication enables the automatic
replication of files and directories on the source partition to the target share. Before you
configure a share on the source system for Directory/File Based Replication, you must
configure a share on the target system to receive the replicated data from the source
share.
For information about configuring Directory/File Based Replication on the source
system, see "Configuring Directory/File or Cartridge Based Replication" on page
351.
To configure a target share for Directory/File Based Replication:
1. Select the share and click Edit.
The Edit Share Settings page displays (see "Edit Share Settings Page" on page 365).
Figure 253: Edit Share Settings Page
2. Select the Enable to receive Directory/File Based replication data check box to enable
Directory/File Based Replication for the share.
Or clear the Enable to receive Directory/File Based replication data check box to
disable Directory/File Based Replication for the share.
3. Enter a Sync ID in the box.
ETERNUS CS800 365