11.3 Receive NAS
The Sync ID is used to identify the source share that will send replicated data to the
target partition. The Sync ID must be identical to the Sync ID of the source share on
the source system.
4. Select an Access option:
l Locked - The share is not allowed to receive new Directory/File Based Replication
data.
l Unlocked - The share is allowed to receive new Directory/File Replication data.
If a share configured for Directory/File Based Replication is locked on the
target system, synchronization jobs may fail on the source system.
5. Click Apply.
Unpack Queue
Use the Unpack Queue to view Directory/File Replication statistics for data received from
the source system.
To view the Unpack Queue, select a share and click View Unpack Queue (see "Unpack
Queue" on page 366).
Figure 254: Unpack Queue
The Unpack Queue displays the following information:
Barcode The barcode of the file or directory to be replicated.
State The replication state of the file or directory.
Click Refresh to update the statistics in the Unpack Queue. Click OK to return to the
Directory/File Based page.
ETERNUS CS800 366
To Next Page
Loading...
