12.2 Hardware
Value The value reported by the sensor or component.
Status The status of the component.
Normal - (Green) The component is operating correctly.
Attention - (Yellow) There is a problem with the
component.
Failed - (Red) The component has failed.
Host Bus Adapters
The Host Bus Adapters page allows you to view information about installed Fibre Channel
cards and their ports.
The Host Bus Adapters page displays only on ETERNUS CS800 configurations
that include a Fibre Channel card.
To access the Host Bus Adapters page, on the Details page, click the Host Bus Adapters
tab (see "Host Bus Adapters Page" on page 384).
Figure 267: Host Bus Adapters Page
The Host Bus Adapters section displays the following information about each Fibre
Channel card:
Component The name of the Fibre Channel and/or card.
Click the name of the card to view detailed information
for the card below.
ETERNUS CS800 384
To Next Page
Loading...
