12.2 Hardware
Status The status of the Fibre Channel card.
l Normal - (Green) The component is operating
correctly.
l Attention - (Yellow) There is a problem with the
component.
l Failed - (Red) The component has failed.
The Fibre Channel Controller section displays the following information about the ports in
the selected Fibre Channel or SAS controller:
Component The number of the Fibre Channel port.
Value The throughput capacity of the port (if connected).
Status The status of the port.
l Up - (Green) The port is connected.
l Down - (Green) The port is not connected.
Network Ports
The Network Ports page allows you to view information about Ethernet ports in the
system. The ETERNUS CS800 includes three or more Ethernet ports (depending on the
configuration).
To access the Network Ports page, on the Details page, click the Network Ports tab (see
"Network Ports Page" on page 385).
Figure 268: Network Ports Page
The Network Ports page displays the following information:
Component The number of Ethernet port.
ETERNUS CS800 385
To Next Page
Loading...
