5.3 Cabling the ETERNUS CS800 S6 System
The last DE is the DE with the always highest identifier in the range of DE-1 to DE-a.
The figures "ETERNUS DX100 S3 cabling with one drive enclosure" on page 96 and
"ETERNUS DX100 S3 reverse cabling with two to ten drive enclosures" on page 96 are
depicting the cabling with a top down arrangement of the modules.
Figure 70: ETERNUS DX100 S3 cabling with one drive enclosure
Figure 71: ETERNUS DX100 S3 reverse cabling with two to ten drive enclosures
The following step by step instructions can be used to verify or to plug the cables:
ETERNUS CS800 96
To Next Page
Loading...
